GUANGDONG XIEDA INTELLIGENT EQUIPMENT CO., LTD.
Professional manufacturer of storage space
News
News
Types of racking for storage cages
Keywords:
Publish Time:
2025-04-02
The following are some recommended types of storage racks suitable for storing storage cages:
1. Heavy-duty beam rack
l
l Features ：
o Provides 100% random accessibility, allowing forklifts or other handling equipment to easily reach any storage location for efficient warehousing operations.
o Suitable for storing goods packaged in units such as pallets or storage cages, with a load capacity of up to 4000kg per layer.
o It can make full use of the warehouse space and achieve classified management of materials.
l
l Applicability ：
o The structure and load-bearing capacity of heavy-duty beam racks make them very suitable for storing storage cages containing heavier items.
o Its adjustable height and good accessibility also meet the storage needs of storage cages of different sizes and weights.
2. Narrow aisle rack
l
l Features ：
o The main structure adopts a beam rack system, but the aisle width is narrower, usually between 1600mm and 2000mm.
o Provides 100% selectivity, allowing forklifts to access any pallet or storage cage at any time.
o The stacking aisle width is slightly wider than the size of the pallet goods, achieving high-density storage requirements.
l
l Applicability ：
o The high-density storage characteristics of narrow aisle racks make it an ideal choice for storing storage cages, especially in warehouses with limited space.
o Suitable for warehouses with large inventory, frequent goods turnover, and high requirements for picking efficiency.
3. Drive-in rack
l
l Features ：
o A continuous and independent rack design without aisle separation, with high storage density.
o High utilization rate of floor space and relatively low investment cost.
l
l Applicability ：
o Drive-in racks are suitable for storing large quantities of the same type of goods, such as similar items packaged using storage cages.
o Suitable for situations with few varieties and large quantities, and suitable for pallet or storage cage entry modes.
4. Mezzanine rack
l
l Features ：
o A fully assembled structure that uses columns and beams to build multi-layer platforms, with shelves or work areas set up on the platforms.
o Low cost, fast construction, and flexible design into two or more layers.
l
l Applicability ：
o Although mezzanine racks are mainly used for storing small-packaged loose parts or goods with many varieties and small quantities, they can also be used to store storage cages in some cases, especially in warehouses with high height and a need to make full use of vertical space.
o Suitable for storing hardware tools, electronic equipment, mechanical parts, etc., and can also be considered for storing specific types of storage cages.
5. Double-deep rack
l
l Features ：
o Using special forklifts, the rack is designed to store goods in two parallel rows.
o High warehouse utilization rate, 50% selectivity, and aisles designed according to the forklift.
l
l Applicability ：
o Double-deep racks are suitable for use in warehouses with low picking rates, and their floor utilization rate can be as high as 42%.
o Suitable for occasions requiring high storage density and fewer types of goods, and can also be considered for storing storage cages, especially when warehouse space is limited and storage capacity needs to be maximized.
For the types of storage racks suitable for storing storage cages, you can choose according to the specific conditions of the warehouse, the characteristics of the goods, and the storage needs. When choosing, the load-bearing capacity, space utilization rate, access efficiency, cost, and maintenance of the rack should be considered comprehensively.
Hot Products
Related Articles
Get a free quote
We welcome any inquiry you may have. Tell us about your project to get a free quote.
National Service Hotline
Contact Email
Foshan City, Nanhai District, Shishan Town, Guanyao Ligang Zixia Industrial Zone
Scan to view the website